It's humongous. Also whisper quiet and running cold even i the hot weather since summer began. Look at the size of the main cooling fan; there are two more in there. Whooooo!!! 😁😁😁 Dave hooked it up for me (saves my back and knees the hurt of climbing around under the desk; and I appreciate this muchly) ... and I took over, to install software. It's my Christmas present, of course. Happy, happy, joy, joy!
For those who are into the hardware side of things, here are its specs:
- AMD Ryzen 9 3900XT,
- 12 cores threaded as 24; 4.7Gh; 70MB cache.
- B450 Tomahawk motherboard (MAX AM4);
- 16GB of RAM (Thermaltake ToughRam Z-ONE RGB, DDR4 3200Hz, CL16 Memory).
- Hard drives: SSD, Samsung 970 EVO 1GB boot + 2GB internal.
- GPU: the MSI GeForce RTX 2070 Super Ventus GP OC Edition, 8BG, with another dedicated cooling fan (Thermaltake Pure 140mm).
- Bluetooth 5.0 (NIC Herald).
- Power source: Thermaltake -- Suppressor F31, with its own big cooling fan.
- 8 USB ports, half of them USB3, one USB C, plus ethernet, 4x speaker-line outs etc.,
- Win10 64.
- "Water cooling ready;" and we can double the capacity of the GPU and RAM, if needed
Sooo, the first thing was to "migrate" from one machine to the other...
A couple of days saw me slogging through the job of installing miles of software.Word 2016, Affinity Publisher, Affinity Photo, Krita and Irfanview were all quickly on, though I needed to import about 750 fonts, plus 4,500 brushes to the photo and paint programs, from my old system. Turned out to be easy. Next came Amberlight (on and tested) ... then, when everything was set, I got into the big stuff, for which The Hulk was built (by IT Warehouse at Marion).
First bit of bad news along this road: Bryce 7 Pro is a 32 bit program only, so it will not run on The Hulk. End of statement there; and all the more reason to keep the old computer on and working (it's a Windows 7 machine, 32 bit, and though Bryce stresses it, it will run okay).
DAZ Studio was an all-day install job, to get the new version (4.14) plus enough "assets" to get my oars back in the water. Done. Then, start up DAZ and ... urk. Talk about a learning curve! The interface has changed significantly from the 4.11 I was accustomed to; and I've simply forgotten a lot. I have to relearn some things I used to do automatically. Also, Studio is simply not cooperating in one or two ways, though I'm sure there's either a solution or a work-around. I'll get there; I;m just not quite there yet!
I also have to manually install many hundreds of third-party assets, from Renderosity and various other 3D marketplaces. That will be a loooong job, so I'll do it a bit at a time. Not a problem, just a chore.
First bit of fabulous news: the unbeatable "file save error" I was getting on the old system right throughout 2018 and 2019 has not, repeat not, recurred in Studio 4.14 under Win10. I can now build a project, save it, reopen it, and have everything right where it should be.
The downside? I can't seem to get raytracing to work! This is terminally weird, and I'll be working on the issue. It's way beyond odd. But that's my problem, and I'm on it, albeit slowly.
Can't wait to see how this system handles the workflow. I'm hoping that what took three hours last year will take twenty minutes now. At the moment, everything is working fine, and the system is dazzlingly fast; I just have to climb halfway up the learning curve before I have pictures to upload here; and I'm thinking that I might blog my progress in Studio 4.14, just as I blogged my baby steps, 11 years ago, in Studio 3! Stay tuned, and bear with me. At the same time as all of this, I'm editing a novel, and while it's not actually difficult, it just guzzles time. Eats up your day and pushes art to the sideline. Done by Christmas, though, and then ... art!!